Zoom MRS-1044 Benutzerhandbuch

• These screens are for display only, and contain no items

that can be edited.

• The remaining recordable time is an approximation.

This operation copies a specified project that is saved on

the hard disk.

A screen will appear in which you can specify the copy-

destination project number.

The display will ask "SURE?"

When the copy operation has been completed, you will

return to the main screen with the copy-destination project

selected.

This operation erases the specified project from the hard

disk. When the following screen is displayed, use the dial

to select the project that you want to erase.

To execute the erasure, press the [ENTER] key. To cancel,

press the [EXIT] key. When the erase operation has been

completed, you will return to the main screen.

It is also possible to erase the currently loaded project. In

this case, the lowest-numbered project will automatically

be loaded after the erase operation has been completed.

Once a project has been erased, it cannot be recovered.

Use this operation with care.

This lets you edit the name of the currently loaded project.

When the following screen is displayed, the character

selected for editing will blink.

Use the cursor [

E

]/[

R

] keys to move the blinking area,

and use the dial to change the character.

For details on the characters that can be used, refer to p.36.

The edited name of the project will be updated when the

project is saved.

This setting lets you write-protect the currently loaded

project. When the following screen is displayed, use the

dial to select one of the following two settings.

●

OFF: Protect is turned off.

●

ON:  Protect is turned on. When protect is on, the

following operations will be impossible.

• Editing or recording on the recorder

• Changing the V-take

• Editing a patch

• Recording or editing a rhythm pattern or the rhythm

Project name

Project number

Copy-destination project number

Project name

Project number