Azden 2-Channel Portable Audio Mixer Benutzerhandbuch
5
○
1
POWER Switch
○
2
POWER Indicator LED: Green indicates power on and good battery condition. Red indicates low battery voltage.
○
3
Ch-L, Ch-R Input Volume Level Controls
○
4
Output Peak Indicator LED: When the output volume level is too high and the sound is distorted, the LED will light in RED.
Reduce the volume level by turning the Input Volume Level Controls ○
3
counterclockwise.
○
5
MIC 1/LINE/MIC 2 Selectors: Selects microphone or line level input on each channel.
○
6
GAIN LOW/HI Switches: Change the gain level of each channel. Refer to the specifications for the actual gain level of LOW/HI
for each input mode.
○
7
OUTPUT Mode Selector: Selects the output mode between mono and stereo.
○
8
Monitor Selector: Selects headphone monitoring from either the microphones during recording (OUTPUT) or playback audio
from the camera (RTN).
○
9
MONITOR Level Control: Adjust the headphone volume level.
○
10
&○
11
Ch-R and Ch-L XLR Inputs: Two balanced XLR inputs attach to microphones or other audio gear such as wireless systems
or sound boards.
○
12
MIC 2 Stereo Input: 3.5mm mini-plug jack that, when a stereo microphone is connected, will distribute the sound to the both
L & R channels. When a monaural microphone is connected, the sound will be sent to Ch-L. Provides 3.5V input power.
○
13
AUX (R) Input: Unbalanced 3.5mm mini-plug jack for connecting to a wireless receiver or other device that has a mini-plug
output cable. The sound will be sent to Ch-R. This input cannot be used simultaneously with the Ch-R XLR input (○
10
).
○
14
RTN Inputs: RCA jacks for connecting AV cable to the camera to monitor the audio during playback.
○
15
OUTPUT Jack: Unbalanced 3.5mm mini-plug jack for connecting to the camera. MIC level output.
○
16
PHONES jack: Headphone jack to monitor the audio from microphones or camera.
○
17
Battery Compartment
○
18
AGC ON/OFF Switch: When turned OFF, disables the Audio Gain Control feature in the camera. Read “Using AGC ON/OFF
Feature” in this manual before using this function.
○
19
Phantom Switch: Activates 48V phantom power.
○
20
Camera Mount Bolt
○
21
Thread Hole for Tripod