Grizzly G0759 Benutzerhandbuch

-38-

Model G0704 (Mfg. Since 08/11)

figure 51.

Bushing cap removal.

figure 53.

Handwheel removal.

figure 52.

Bushing oil location.

To lubricate the vertical leadscrew bushing

and ring & pinion gears:

1. disConneCt mill/drill From poWer!

2. remove the bushing cap by unthreading the

four cap screws that secure it (

figure 51).

3. apply several drops of light machine oil to

the bushing edge, then rotate the vertical
handwheel to disperse the oil (

figure 52).

bushing Cap

4. replace the bushing cap.

5. remove the acorn nut and flat washer that

secure the vertical handwheel, then remove
the handwheel (

figure 53).

6. remove the four cap screws that secure the

handwheel shaft pillow block, then carefully
remove the assembly (

figure 54).

figure 54.

Handwheel gears.

7. use mineral spirits and a brush and rag to

clean as much of the existing grease and
debris as possible off of the ring and pinion
gears. allow the parts to dry.

8. apply a liberal coat of multi-purpose grease

to the pinion gear.

9. re-assemble the machine by reversing the

steps above.

pinion gear

ring gear

pillow block