KYOCERA 4550ci Benutzerhandbuch

4

You can use the procedure below to select an output destination such as the optional document finisher for your 
copies.

Optional output destinations include the job separator, 1,000 sheet document finisher, 4,000 sheet 

document finisher, and mailbox.

The table below shows the available output destinations. 

To change the default  destination for copies, refer to Paper Output on page 9-15 for details.

When [Heavy 3] (164 g/m

2

 - ) or higher is set in Paper Weight and Mailbox (Option) is set for the output 

destination, the output destination is automatically changed to a tray that can be used.

Use the procedure below to select the output destination.

Press the Copy key.

Place the originals on the platen.

Press [Org./Paper/Finishing] and then [Paper 
Output].

Select the output destination for finished copies.

Press [OK].

Press the Start key to start copying.

Inner tray*

*

This cannot be selected when the optional document finisher is installed.

Inner tray of the machine (where copies are stored)

Finisher Left Tray
Finisher Top Tray

Tray of the optional 1,000 sheet document finisher

Tray A, Tray B, Tray C

Trays A to C in the optional 4,000 sheet document finisher

Right Tray

Optional right job separator

Job Separator Tray*

Optional job separator

Tray 1 to 7

Trays 1 to 7 in the optional mailbox (tray 1 is the top tray)

Paper Output

Face Up

Status

Copies

Cancel

OK

Add Shortcut

Tray A

Right Tray

Tray C

Tray B

Tray 1

Tray 3

Tray 2

Tray 5

Tray 4

Tray 6

10/10/2010  10:10

Tray 7

100%
A4

A4

Preview

Original
Zoom
Paper

:
:
: