KYOCERA 4550ci Benutzerhandbuch

The following table lists the specifications of paper that is supported with this machine. Refer to the subsequent 
sections for further details.

Some recycled paper does not meet requirements for use with this machine as listed in the Basic 

Paper Specifications shown below, such as moisture or pulp content. For this reason, we recommend 
purchasing a small amount of recycled paper as a sample for testing prior to use. Choose recycled paper that 
gives the best printing results and contains low levels of paper dust.

We are not responsible for the problems occurred from the use of paper that does not conform to our 
specifications.

This section describes guidelines for choosing paper. 

Avoid using paper with bent corners or that is curled, dirty, or torn. Do not use paper that has a rough surface or 
paper fiber lint, or that is especially delicate. Use of paper in any of these conditions will not only deliver poor 
copies but may also cause jams and shorten the useful life of the machine. Choose paper with a smooth and even 
surface; however, avoid coated paper or paper with a treated surface as it may damage the drum or fusing unit.

Do not use paper such as paper that has been coated or surface-treated or paper that contains plastic or carbon. 
Those types of paper may produce harmful fumes from the heat of printing and may damage the drum.

Be sure to use the standard paper that contains at least 80% pulp, i.e., not more than 20% of the total paper 
content consists of cotton or other fibers.

Paper of the following sizes is supported by the machine. 

Weight

Cassettes: 
60 to 220 g/m

2

 (for the 30/30 ppm or 35/35ppm)

60 to 256 g/m

2

 (for the 45/45 ppm or 55/50ppm) 

Multi purpose tray: 60 to 300 g/m

2

Thickness

0.086 to 0.110 mm

Dimensional accuracy

±0.7 mm

Squareness of corners

90° ±0.2°

Moisture content

4 to 6%

Pulp content

80% or more