HP (Hewlett-Packard) CF081A#BGJ Benutzerhandbuch
Fuser pressure-release sensor
1.
Open the right door.
2.
Lower the secondary transfer assembly.
3.
Remove the fuser, and then rotate the gear (callout 1) to move the flag (callout 2). If the flag does
not actuate, replace the fuser.
Figure 3-11
Test the fuser pressure-release sensor (1 of 2)
2
1
4.
Insert a piece of paper to activate the fuser pressure-release sensor.
Figure 3-12
Test the fuser pressure-release sensor (2 of 2)
5.
Check the control-panel display for sensor response.
6.
If there is no response, replace fuser pressure-release sensor.
266
Chapter 3 Solve problems
ENWW