Ricoh SP C250SF Benutzerhandbuch

Specifying the Scan Settings

This section explains how to specify image density and scan quality for the current job.

Adjusting Image Density

There are five image density levels. The higher the density level, the darker the printout.

1.

Press the [Density] key.

DAC511

2.

Press the [ ] or [ ] key to select the desired density level, and then press the [OK] key.

• You can change the machine's default [Density] setting to always make copies with a specific

• Temporary job settings are cleared in the following cases:

• When no input is received for the period of time specified in [System Auto Reset Timer] while

• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed.

Selecting the Document Type According to Original

There are three document types:
Mixed

Select this when the original contains both text and photographs or pictures.

4. Copying Originals

118