Ricoh SP C250SF Benutzerhandbuch

• You can change the machine's default [Scan Size] setting to always scan originals with a specific

• Temporary job settings are cleared in the following cases:

• When no input is received for the period of time specified in [System Auto Reset Timer] while

• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.
• When the machine's default for the same setting is changed

Adjusting Image Density

This section explains how to adjust image density for the current job.
There are five image density levels. The higher the density level, the darker the scanned image.

1.

Press the [Density] key.

DAC511

2.

Press the [ ] or [ ] key to select the desired density level, and then press the [OK] key.

• You can change the machine's default [Density] setting to always scan with a specific density level.

• Temporary job settings are cleared in the following cases:

• When no input is received for the period of time specified in [System Auto Reset Timer] while

• When the [Clear/Stop] key is pressed while the initial screen is displayed.
• When the machine's mode is changed.
• When the power is turned off.

Specifying the Scan Settings

137