Ricoh SP C250SF Benutzerhandbuch

Problem

Solution

Prints do not stack properly.

• The paper being used may be damp. Use paper that has

been stored properly. See page 57 "Supported Paper".

• Select [Lvl.2: Medium] or [Lvl.3: Strong] in [Anti-Humidity

Level] under [System Settings]. Note that if you select [Lvl.
2: Medium] or [Lvl.3: Strong], the first print takes longer
than subsequent prints.

• Pull up the appropriate stop fence (forward fence for

A4/Letter, rear fence for Legal size prints). See page 19
"Guide to Components".

The printed paper is curled.

• Load the paper upside down in the paper tray.
• If the paper curl is severe, retrieve prints from the output

tray more frequently.

• The paper being used may be damp. Use paper that has

been stored properly.

• Select [Lvl.1: Weak], [Lvl.2: Medium] or [Lvl.3: Strong] in

[Anti-Humidity Level] under [System Settings]. Note that if
you select [Lvl.2: Medium] or [Lvl.3: Strong], the first print
takes longer than subsequent prints.

• If you enable [Toner Saving] under [System Settings],

printing is generally less dense.

Printed envelopes come out creased. Check if the fusing unit levers are properly set. Lower the fusing

unit levers.