Ricoh 2015 Benutzerhandbuch

Other Printing Problems

19

The print on the 
entire page is fad-
ed.

If [Toner Saving] is selected on the [Print Quality] tab in the printer driver, the 
entire page will be faded when printed.

❒ In PostScript 3, click [Advanced...] on the [Paper/Quality] tab, and then se-

lect [Toner Saving 1] or [Toner Saving 2] in [Print Mode] in the [Advanced] di-
alog box.

See the printer driver Help.

Smudged print.

Settings for thick paper have not been made when printing on thick paper.

• PCL 6/5e and PostScript 3

Select [Thick] in the [Type:] list on the [Paper] tab.

• RPCS™

Select [Thick] in the [Paper type:] list on the [Print Settings] tab.

When printing 
graphics, the out-
put and the screen 
are different.

If the printer driver is configured to use the graphics command, the graph-
ics command from the machine is used to print.

If you want to print accurately, set the printer driver to print without using 
the graphics command.
See the printer driver Help.

Page layout is not 
as expected.

Print areas differ depending on machine used. Information that fits on a 
single page on one machine may not fit on a single page of another ma-
chine.

Adjust the [Printable area:] setting in the [Printer Configuration...] dialog box 
on the [Print Settings] tab in the RPCS™ printer driver.
See the printer driver Help.

Duplex printing is 
not possible.

• Duplex printing cannot be done with paper set in the bypass tray. 

When using duplex printing, make settings to use paper from a tray 
other than the bypass tray.

• Duplex printing cannot be done with thick paper, OHP transparencies, 

or labels specified as the paper type. Specify another paper type.

• Duplex printing cannot be done using a tray for which [Duplex] is not 

selected as the paper type in [Tray Paper Settings] in [System Settings]. Se-
lect [Duplex] as the paper type in [Tray Paper Settings]. See General Settings 
Guide.