Ricoh 2015 Benutzerhandbuch
Reception Functions
43
4
-
-
-
-Specifying E-mail Transfer
The originator can request transfer of e-mail sent to another fax machine by spec-
ifying the e-mail address as follows:
ifying the e-mail address as follows:
❖
❖
❖
❖ Fax Number
fax=destination fax number@host name of this machine. domain name
Example: to transfer to fax number 212-123-4567, specify:
fax=2121234567@abc.company.com
Example: to transfer to fax number 212-123-4567, specify:
fax=2121234567@abc.company.com
❖
❖
❖
❖ Quick Dial Destination
fax=#Quick Dial key number@host name of this machine.domain name
Example: to transfer to the destination number 1:
fax=#1@abc.company.com
Example: to transfer to the destination number 1:
fax=#1@abc.company.com
❖
❖
❖
❖ Group Destination
fax=#**Group number@host name of this machine.domain name
Example: to transfer to the destination programmed under Group number 4:
fax=#**4@abc.company.com
Example: to transfer to the destination programmed under Group number 4:
fax=#**4@abc.company.com
JBIG Reception
If you use JBIG (Joint Bi-level Image
Experts Group) compression, you can
send photographic originals faster
than with other methods of compres-
sion. It allows you to receive messag-
es sent in the JBIG format through
JBIG Transmission.
Experts Group) compression, you can
send photographic originals faster
than with other methods of compres-
sion. It allows you to receive messag-
es sent in the JBIG format through
JBIG Transmission.
Auto Fax Reception Power-up
This machine can be set to shut down
automatically if no one has used it for
a while. In these situations, even
though the operation switch is off, the
machine can still receive incoming
messages as long as the main power
switch is on.
automatically if no one has used it for
a while. In these situations, even
though the operation switch is off, the
machine can still receive incoming
messages as long as the main power
switch is on.
Important
❒ Reception is not possible if both
the operation switch and main
power switch are turned off.
power switch are turned off.
Note
❒ You can set whether messages are
printed as soon as they are re-
ceived (Immediate Reception)
with the User Parameters. See p.80
“User Parameters” (switch 14, bit
0).
ceived (Immediate Reception)
with the User Parameters. See p.80
“User Parameters” (switch 14, bit
0).
❒ You can also have fax messages re-
ceived by Memo ry Reception
(Substitute Reception) printed af-
ter the machine is turned on.
(Substitute Reception) printed af-
ter the machine is turned on.
Kir-C2-AEcombine_F_FM.book Page 43 Monday, September 29, 2003 11:39 AM