Ricoh 2050L Benutzerhandbuch
Faxing
12
2
C
Insert the document face down
into the feeder until the machine
beeps. Then adjust the guides to
match the width of the document.
into the feeder until the machine
beeps. Then adjust the guides to
match the width of the document.
Note
❒ You can dial before you set the
document. Place the document
after you dial the number and
go to step
after you dial the number and
go to step
G.
❒ Please set your document
straight in the feeder. If you set
more than 15 sheets, make sure
the ends of your document are
not skewed.
more than 15 sheets, make sure
the ends of your document are
not skewed.
D
The display will look like this:
TRANSMIT OPTIONi
DIAL FAX NUMBER
E
If the Memory indicator is not lit,
press the
press the
{Memory} key.
F
Dial the number in one of the fol-
lowing ways.
lowing ways.
TRANSMIT Y/START
5551234kkkkkkkkkkkkk
*1
In this example Group Dial is pro-
grammed in Quick Dial 08.
grammed in Quick Dial 08.
*2
In this example Quick Dial key 30
is programmed as the Group key,
and Group dial number 1 is pro-
grammed.
is programmed as the Group key,
and Group dial number 1 is pro-
grammed.
Note
❒ If you install the handset or an
external telephone, you can
send the message manually.
Pick up the handset and dial.
send the message manually.
Pick up the handset and dial.
❒ If you want to erase a digit of
the phone number, press the
{Clear} key. If you want to erase
the entire number, press the
the entire number, press the
{No} key.
❒ The maximum destinations you
can dial using the ten key pad is
68. However, this limitation is
also subject to memory capaci-
ty.
68. However, this limitation is
also subject to memory capaci-
ty.
TSTH110N
TSTH110N.eps
Tsms040e.eps
Ten Key Pad
Quick Dial
Speed Dial
Group
Example:
Method
*1
Quick
Dial key 08.
Method
*2
Quick
Dial key 30 and 1
on the ten key pad.
on the ten key pad.
1
2
3
4
5
6
7
9
*
GFDIAL0N
07
06
GFDIAL1N
Speed Dial
1
0
Example: Speed Dial 10
GFDIAL2N