FieldServer FS-8700-83 Benutzerhandbuch

FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA  Web:www.fieldserver.com 

Tel: (408) 262-2299   Fax: (408) 262-9042   Toll_Free: 888-509-1970   email: support@fieldserver.com 

FieldServer Related Map Descriptor Parameters 

 

Map_Descriptor_Name 

Name of this Map Descriptor 

Up to 32 alphanumeric 
characters 

Data_Array_Name 

Name of Data Array where data 
is to be stored in the Bridge 

One of the Data Array names 
from “Data Array” section above 

Data_Array_Location 

Starting location in Data Array 

0 to maximum specified in 
“Data Array” section above 

Function 

Function of Client Map 
Descriptor. 
 
Reads (rdbc / rdb ) are not 
allowed. The use of WRBX is 
recommended for the ack / 
silence / reset functions. A 
message will be generated 
each time the value in the 
associated array is updated 
(even if the value stays the 
same.) 
 

Passive, WRBC, WRBX 

Driver Related Map Descriptor Parameters 

Node_Name 

Name of Node to fetch data 
from 

One of the node names 
specified in “Client Node 
Descriptor” above 

Data_Type Data 

type 

 
This parameter is only required 
for passive / server map 
descriptors. 
 
The Data Type determines the 
type of data that gets stored 
when a message get received. 
The Data Type corresponds to 
the ‘Status’ field in a Gamewell 
message. 
 Additional information is 
provided in section 6.2 

Any 
Alarms 
Faults 
Events 
Bus 
Comm 
Control 
Ack 
Signal Silence 
Troubles 
Supervisories 
Action_Numbers 
Action_Bits 
Dump