Fujitsu B23Q8YA-G-02-F Benutzerhandbuch

 

 

 

   

32 

Limitations and known bugs 

No 

Recommended actions 

Remarks 

For growfs(1M), the following patch is required to be installed. 

120254-02 or later SunOS 5.10: ufs Patch   

5 

Install the above patches. 

Solaris 10 

3/05 and 

1/06 only 

When using any of the following PGX cards and monitors, the display monitor does not 

enter standby mode if you haven’t logged on from CDE (Common Desktop 

Environment). 
z  PGX frame buffer (X3660A) 
z  PGX64 frame buffer (X3768A/A-A)   
z  Second monitor (X7128A/AA/AJ, X7128B) 
To use PGX32 frame buffer (X3668A/A-A, X3668B/B-A/B-B), the following patches 

are required to be installed. 

119254-06 or later    SunOS 5.10: Install and Patch Utilities Patch   

119309-03 or later    SunOS 5.10: PGX32 Graphics 

6 

The above removes the PGX frame buffer and monitor limitation. When using the PGX, 

PGX64 frame buffer and a second monitor, ensure you turn off the power to the display 

monitor when the monitor is not in use. 

Solaris 10 

3/05 only 

Some optional drivers are not yet supported with Solaris 10. 

7 

Contact your support engineer for details. 

 

/etc/resolv.conf file might not be created when you select “DNS” name service during 

OS installation. 

8 

Install the following patch. 
z  119252-02 or later SunOS 5.10: System Administration Applications Patch 

Solaris 10 

3/05 only 

svccfg(1M) might be terminated when editprop subcommand is used. 

# svccfg 

 svc:> select /network/inetd 

 svc:/network/inetd> editprop 

 :q 

  svccfg: unrecognized character " 

9 

Use setprop subcommand of svccfg(1M) instead of editprop to modify properties of 

service. 

 

For Kernel debugger (kmdb(1), mdb(1) -K) on SPARC64 GP, the following patches are 

required to be installed. 

118822-23 or later    SunOS 5.10: kernel Patch 

10 

Install the above patch. 

Solaris 10 

3/05 only 

11 

Solaris Live Upgrade using lu(1M) and lucreate(1M) might fail with the following error 

when creating a mirror disk. 

# lucreate -m /:/dev/md/dsk/d10:ufs,mirror –m \ 

/:/dev/dsk/c1t2d0s0,d11:attach -m/:/dev/dsk/c1t3d0s0,d12:attach -n newBE 

Discovering physical storage devices 

Discovering logical storage devices 

Cross referencing storage devices with boot environment configurations 

Determining types of file systems supported 

Validating file system requests 

ERROR: file system option <mirror> is not valid on this system 

ERROR: cannot use file system configuration </:/dev/md/dsk/d10:ufs,mirror> 

ERROR: cannot create new boot environment using file systems as configured 

ERROR: please review all file system configuration options 

ERROR: cannot create new boot environment using options provided