Fujitsu B23Q8YA-G-02-F Benutzerhandbuch

Limitations and known bugs

Recommended actions

Remarks

Solaris Live Upgrade is not supported with RAID-1(mirror)

Custom Jumpstart installation for mirror volumes using a profile that has filesys keyword

of both original and target disk, will fail and the following error message will be shown

at first boot after the installation.

metattach: host-name: dx: can't attach labeled submirror to an unlabeled mirror

Create a one-way mirror in the profile file. Define a primary submirror Disk as filesys

keyword. Then attach additional submirrors with the finish script to create a two-way

mirror.
z Do not include cylinder 0 of the disks in meta devices.
z The disks which constitute a two-way mirror should have the same specification

and configuration. Examples of a profile file and a finish script are shown as

follows:

1) profile file

# profile keywords profile values

# ---------------- -----------------

: :

filesys c0t1d0s4 0:1 unnamed

filesys mirror:d100 c0t1d0s0 200 /

metadb c0t1d0s3 size 8192 count 2

2) finish script

#!/bin/sh

prtvtoc /dev/rdsk/c0t1d0s2 > /a/c0t1d0.vtoc

fmthard -s /a/c0t1d0.vtoc /dev/rdsk/c0t0d0s2

metadb -a -c 2 c0t0d0s3

metainit d102 1 1 c0t0d0s0

metattach d100 d102

in.routed might generate a core dump under the following conditions.

1) No entry of localhost name in /etc/hosts and

2) No /etc/defaultrouter file and

3) Reboot system

Install the following patch.
z 119712-03 or later SunOS 5.10: usr/sbin/in.routed Patch

Package remove using pkgrm(1M) might fail if the package provides SMF services and

the package has been removed and installed repeatedly.

## Removing pathnames in class <manifest>

svc:/system/fjsvmadm-evhandsd:default remains enabled; aborting

pkgrm: ERROR: class action script did not complete successfully