Gateway FHD2400H Benutzerhandbuch

Using Your Gateway Flat-Panel Monitor

8

Adjusting the stand

Rotating the screen

You can rotate the screen clockwise 90° to change between landscape and portrait views. For 
information on automatically rotating the display image as you manually rotate the monitor, see 

.

Ergonomic guidelines

The recommended screen positioning is based upon the following guidelines. These guidelines are 
based on available scientific literature and published standards.

Screen height

The recommended screen height for displays (except in special circumstances, such as for bifocal 
use) is that the top of the display should be set at or slightly below (about 1 inch or 25 mm) your 
eye level while you are sitting in a comfortable working posture. This guideline places the center 
of the screen at an ideal 15° to 20° viewing angle for most desktop displays. If the display has 
multiple users, the screen height should be easily adjustable to accommodate each user’s height 
and preference.

Screen tilt

The screen should be tilted so your line of sight is perpendicular to the screen. This angle creates 
the most consistent viewing distance when scanning from the top of the screen to the bottom. 
You may need to adjust lighting to avoid screen glare when the screen is tilted upward.

To rotate the screen while the optional speaker bar is attached, first tilt the screen back 

for more clearance between the speaker bar and the tabletop.

For the brightest viewing angle, adjust the screen so that you are viewing it from 

within a 160° angle of the screen. When the display is rotated to portrait mode, the 
side-to-side viewing angle may be reduced.

Portrait mode

Landscape mode