GE 68K System Benutzerhandbuch
GE Energy Services
68K System Monitor
User's Guide
SWM0023 1.00 2
General
3-80
Full Release
TR - Trace,
Continued
Syntax (continued)
Example 1
Type tr /r 20 /t0 10 208000 = 12345678 and press
ENTER
.
Results: This will allocate a buffer for 20 samples and
triggers when the long memory location becomes
12345678. It saves 10 samples before the trigger, the
trigger sample and 9 samples more to fill the buffer.
12345678. It saves 10 samples before the trigger, the
trigger sample and 9 samples more to fill the buffer.
Example 2
Type tr /r 20 /t0 10 208000 change and press
ENTER
.
Results: This triggers if the long memory location changes
value.
Example 3
Type tr /r 20 /t0 10 208000 != 12345678 and press
ENTER
.
Results: This triggers if long memory value changes from the
value 12345678.
Example 4
Type tr /r 20 /t1 10 00123456 and press
ENTER
.
Results: This triggers when the RTC value if greater than or
equal to 00123456.
Example 5
Type tr /r 20 /t2 10 30123456 and press
ENTER
.
Results: This triggers after the process with the ID of
30123456 runs.
Special
Considerations
Considerations
This function is only available as a special debug BootROM as
there is not enough room for it to be permanently included.
there is not enough room for it to be permanently included.
Currently, the BootROM code must have the TRACE
command compiled into S043-0 before you can use this
command. You will have to remove some other commands in
order to make room for it.
command compiled into S043-0 before you can use this
command. You will have to remove some other commands in
order to make room for it.