GE 68K System Benutzerhandbuch
68K System Monitor
User's Guide
User's Guide
GE Energy Services
General
SWM0023-1.00 -2
Full Release
3-41
IMG - Display Image Information
Platform
o
CPM
o
D20
D20 Base
D20 Base
þ
D20 ME
D20 Base
D20 Base
o
D20/200
CCU Base
CCU Base
þ
D20/200 ME
CCU Base
CCU Base
þ
D25
Description
Use this command to display information on the BootROM, FLASH, and NVRAM
configuration images.
configuration images.
The information consists of:
For the BootROM and FLASH images, a description string and a part number;
For the NVRAM configuration, the static CRC and configuration version.
Note:
If any of this information is not available, the monitor will display a
message indicating this in place of the expected information.
message indicating this in place of the expected information.
Because the IMG command only displays information entered into the
MODULE.MAK file used in the SDS system, any omissions or mistakes in
the MAK file will be reflected in the output of this command.
MODULE.MAK file used in the SDS system, any omissions or mistakes in
the MAK file will be reflected in the output of this command.
Syntax
Below is usage and syntax information for this command
Command Format
img
Variables
None
Parameters
None
Example
Type img and press
ENTER
.
Results: The monitor displays information on the FLASH,
BootROM, and configuration images currently
active in the system.
active in the system.
Special
Considerations
Considerations
None