Elmo Guitar Digital Servo Drive Benutzerhandbuch
3.7.2
Connecting Main Power
Connect the VP+, PR and PE pins on the Guitar in the manner described in section 3.5
(Integrating the Guitar on a PCB).
(Integrating the Guitar on a PCB).
The source of the 12 ~ 195 VDC Main Power Supply must be isolated.
Figure 3-4: Main Power Supply Connection Diagram (no Auxiliary Supply)
3.8 Auxiliary
Supply
(for drive logic)
Notes for 12 ~ 195 VDC auxiliary supply connections:
The source of the 12 ~ 195 VDC Auxiliary Supply must be isolated.
Connect the VL and PR pins on the Guitar in the manner described in section 3.5 (Integrating the
Guitar on a PCB).
Guitar on a PCB).
Pin Function
Pin
Positions
VL
Auxiliary Supply Input
PR Supply Input Return
Caution:
Power from the Guitar to the
motor must come from the Main
Supply and NOT from the
Auxiliary Supply.
motor must come from the Main
Supply and NOT from the
Auxiliary Supply.
Table 3-2: Auxiliary Supply Pins
Guitar Installation Guide
Installation
MAN-GUIIG (Ver. 1.1)
3-10