Acu-Rite CNC 3500i Benutzerhandbuch

ACU-RITE 3500i

The BlockForm command is used to define a window in relation to the 
part zero. This is used by the Draw function to present a solid model 
of the raw stock. Block Form can be placed anywhere within the 
program and must be accompanied by all of the parameters.



Select the More Milling button, and then "BlockForm" 

from the pop-up menu.



Conversational format: BlockForm



G-code format: G120

Even if there is no tool diameter compensation being 
used, you must have an active tool with a diameter before 
draw will graphically show material being machined from 
the above stock definition.

XMax

X

Absolute position of the most positive edge 
of the part stock in the X-Axis with respect 
to Absolute Zero. (Required)

YMax

Y

Absolute position of the most positive edge 
of the part stock in the Y-Axis with respect 
to Absolute Zero. (Required)

ZMax

Z

Absolute position of the most positive edge 
of the part stock in the Z-Axis with respect 
to Absolute Zero. (Required)

XMin

I

Absolute position of the most negative 
edge of the part stock in the X-Axis with 
respect to Absolute Zero. (Required)

YMin

J

Absolute position of the most negative 
edge of the part stock in the Y-Axis with 
respect to Absolute Zero. (Required)

ZMin

K

Absolute position of the most negative 
edge of the part stock in the Z-Axis with 
respect to Absolute Zero. (Required)