Acu-Rite CNC 3500i Benutzerhandbuch

7 Programming: Canned Cycles, sub-programs

A Feed block sets the feedrate for Line moves, arcs, and cycles that 
do not contain specifically programmed feed rates. Feed blocks also 
set the feedrate for modal moves. Add Feed blocks whenever 
necessary



Select the More Milling button, and then "Feed" from 

the pop-up menu.



Conversational format: Feed



G-code format: F[n]

A FeedU block sets the feedrate for the 4th axis, U. If the U-axis is a 
rotary axis, the units for the FeedU block are degrees per minute (deg/
min); otherwise, the units are the same as in the Feed block.



Select the More Milling button, and then "FeedU" 

from the pop-up menu.



Conversational format: FeedU

A Feed block only alters the programmed feedrate, it does 
not activate the Feed Mode.

Feed

F

The rate of motion to be activated. 
(Required)

FeedU

F

The rate of motion for the 4th axis to be 
activated. (Required)