Zebra Technologies 2237A10L010 Benutzerhandbuch

LCD Error Messages

9/6/07

IIIPlus/R110Xi/R170Xi User Guide

13383L-004 Rev. A

The printer prints while the 
ERROR light flashes. 

An improperly connected printhead data or power cable 

can cause this error message. The printhead may be hot enough to 

cause severe burns. Allow the printhead to cool.

The printhead temperature is 
approaching its lower operating 
limit.

Continue printing while the printhead 
reaches the correct operating 
temperature. If the error remains, the 
environment may be too cold for 
proper printing. Relocate the printer to 
a warmer area.

The printhead data cable is not 
properly connected.

Turn off (

) the printer 

before performing this procedure. 

Failure to do so can damage the 

printhead.

1.

Turn off (O) the printer.

2.

Disconnect and reconnect the data 
cable to the printhead.

3.

Ensure that the cable connector is 
fully inserted into the printhead 
connector.

4.

Turn on (I) the printer.

The printhead has a faulty 
thermistor.

Call a service technician.

The printer stops; the 
ERROR light flashes. 

The printhead may be hot enough to cause severe 

burns. Allow the printhead to cool.

The printhead is over temperature.

Allow the printer to cool. Printing 
automatically resumes when the 
printhead elements cool to an 
acceptable operating temperature.

WARNING

HEAD COLD

WARNING

HEAD TOO HOT