Ricoh 2000 Benutzerhandbuch

Seite von 204
Transmission
40
1
Transmission with Image Rotation
Generally, place A4, 8
1
/
2
"×11" originals in the landscape orientation (L). If you
place an A4, 8
1
/
2
"×11" original in the portrait orientation (K), the image is sent
rotated by 90°. Providing the receiver has A4, 8
1
/
2
"×11" landscape paper (L),
the document is printed the same size as the original.
Note
❒ This function is unavailable with Immediate Transmission.
Stamp
When sending a fax document using the ADF or ARDF, the machine can stamp
a circle mark at the bottom of the original.
When sending a two-sided document, the document is marked at the bottom of
the front page and top of the rear page.
Important
❒ The optional ADF or ARDF is required.
❒ Stamp only works when scanning from the ADF or ARDF.
❒ This function must be registered to a User Function key in advance. It is reg-
istered to the User Function key {F3} by default.
A
Place the original, and then select the scan settings you require.
B
Press the User Function key {F3} to light the indicator.
To cancel the stamp, press the User Function key {F3} again to turn off the indicator.
       ARX024S