Multitech MT5600ZDXV Benutzerhandbuch

You must have a telephone line with a conveniently located connector

(jack) to accept the cable that comes with the modem. If you do not

have a telephone jack near your computer, you should install an

extension before proceeding.

In North America, telephone extension kits and accessories are available

at electronics stores and wherever telephones are sold. You may also

hire an independent contractor or your local telephone company to do

the work. If you want to add a line for this modem, you must contact your

telephone company.

1. Never install telephone wiring during a lightning storm.

2. Never install telephone jacks in wet locations unless the jack is specifically

designed for wet locations.

3. This product is to be used with UL and cUL listed computers.

4. Never touch uninsulated telephone wires or terminals unless the telephone

line has been disconnected at the network interface.

5. Use caution when installing or modifying telephone lines.

6. Avoid using a telephone (other than a cordless type) during an electrical

storm.  There may be a remote risk of electrical shock from lightning.

7. Do not use the telephone to report a gas leak in the vicinity of the leak.

8. To reduce the risk of fire, use only No. 26 AWG or larger Telecommunication

line Cord.

To operate the modem, you must have data and fax communications

software. Data comm  software simplifies control of the modem by guiding

you through the process of selecting your serial port, your port speed, and

other variables, and then storing your settings, including frequently called

phone numbers, so they can be recalled with the stroke of a key or the click

of a mouse. The software must be set up, or configured, before you can

use it.   You must have Microsoft Windows 3.1 or later to run most prevalent

software packages. If you require software for DOS or for the Macintosh

operating systems, please contact Multi-Tech Sales.

The only assembly required is to mount the feet on the bottom of the

modem. Simply peel the four self-adhesive plastic feet off the backing strip

and press them into the recesses on the bottom of the modem.