Multitech MT5600ZDXV Benutzerhandbuch

The ZDX has no special placement restrictions, but we recommend that

you place it where you can see the indicators on the front panel.

To install the modem mechanically, you must connect the serial datalilne,

phone line, and the power cord to their proper connectors.

To install your modem:

1. Attach modem to dial-up phone line using the RJ11 telephone cord provided

with it.  Plug one cable end into the telephone jack; plug the other cable end

into the LINE jack on the modem.

The LINE jack is not interchangeable with the PHONE jack (see rear of

modem, Figure 2-2). Do not plug the telephone into the LINE jack or the

line cable into the PHONE jack. BABT regulations require that the

telecommunication cable be connected to the modem prior to being

connected to the network.

2. Attach the modem to your PC or terminal with an RS232 (or V.24) cable (see

Figure 2-1 and Figure 2-2).  Be sure to tighten the mounting screws on the

DB connectors.

3. Connect your telephone set to the phone jack using the RJ11 cable.

4. Attach the modem to the AC Power transformer and plug  the AC connector

into a live AC outlet.

Use only the power

supply shipped with the modem.  Use of any other power supply will void

the warranty and could damage the modem.