Multitech MT5600ZDXV Benutzerhandbuch

seconds 0–255

5

Sets the length of time, in sec-

onds, that the modem ignores

DTR for taking the action speci-

fied by &Dn.  Its units are one

hundredths of  a second.

Bit-Mapped Options Status Default: 0

Bit 0-1

Reserved

Bit 2

Reserved (always 0)

Bit 3-4

Pulse Dialing (&Pn)

  0 = 39%-61% make/break ratio at 10 pulses per second (&P0)--

Default.

0 = 33%-67% make/break ratio at 10 pulses per second (&P1).

0 = 39%-61% make/break ratio at 20 pulses per second (&P2).
0 = 33%-67% make/break ratio at 20 pulses per second (&P3).

1 minute 0–255

70ms

Sets the length of time, in

units of 10 ms, that the

modem will go on-hook when

it encounters a flash (!) dial

modifier in the dial string.  The

time can be limited as it is a

country dependent parameter.

1 minute 0–255

0

S30 specifies the length of

time (in tens of seconds) that

the modem waits before

disconnecting when no data is

sent or received.  This function

is only applicable to buffer-

mode.

decimal 0–255 17

Sets the value of the XON character.

decimal 0–255

19

Sets the value of the XOFF charac-

ter.