Multitech MT5600ZDXV Benutzerhandbuch

Bit-Mapped Options Status (Indicates the status of command

Options.)  LAPM Failure Control Default: 7

Bits 0-2 This option indicates what should happen upon a LAPM failure.

These fallback options are initiated immediately upon connection if S48 =

128.  If an invalid number is entered, the number is accepted into the

register, but S36 will act as it the default value has been entered.

0 = Modem Disconnects.

1 = Modem stays on-line and a Direct mode

connection is established.

2 = Reserved

3 = Modem stays on-line and a Normal

mode connection is established.

4 = An MNP connection is attempted and if

it fails, the modem disconnects

5 = An MNP connection is attempted and if

it fails, a Direct mode connection

is established

6 = Reserved

 7 = An MNP connection is attempted and if

             it fails, a Normal modem connection

is established (Default)

Bits 3-7

Reserved

S37 Bit-Mapped Options Status

(Indicates the status of command Options.)

Desired DTE Connection Speed    Default: 0

When the Nn command is issued or the S37 register value is modified, the

+MS command subparameters are updated to reflect the speed and the

modulation specified bit the S37 value.  For Example: