Zoom X6v VoIP Benutzerhandbuch

Bridging from PSTN to VoIP

Parameter

Description

Default

Bridge From PSTN to VoIP

Enable or disable the bridge

Disabled

Auto Answer PSTN (FXO) Calls

Enable or disable auto-answer PSTN calls

Disabled

FXO Port Accept Anonymous Calls

Enable or disable anonymous call
acceptance on FXO port

Disabled

FXO Port Only Accept Calls with
Caller ID

Enable or disable acceptance of caller ID
calls only on FXO port

Disabled

FXO Port Accept Only These Numbers
(01 to 10)

When any numbers are listed, only calls to
those numbers will be accepted.

Caller Password

Specifies requirement for caller password

Disabled

Password Dial String

Specifies required caller password string

Miscellaneous TELCO Parameters

Parameter

Description

Default

Telco Port Display Caller ID

Enable or disable the caller ID display

Disabled

Telco Port Caller ID Sent After One

Ring

Indicate to device whether Telco CID is
sent before or after the first ring

Enabled

PSTN CID Wait Duration (10 ms)

Time after incoming call initiation (first ring
or line reversal to continue looking for CID
signal). (0 to 65535 ms)

500 ms

PSTN CID Clear Duration (10 ms)

Time after last ring to continue to display
CID. (0 to 65535 ms)

1000 ms

Billing Delay Duration (10 ms)

Time after auto-answer to send Bong tone
prompt in bridge mode. (0 to 65535 ms)

100 ms

PSTN Security Entry Duration (10 ms)

In bridge mode, time within which the user
must enter security code, if enabled.
(0 to 65535 ms)

1000 ms

If My Call Starts With These Digits ....

Requests the line to use when dialing
numbers that begin with the specified
digits.

If I Normally Want Auto-Add Area
Code Calls Routed ....

Enables or disables alternate auto-add
routing of Telco line calls

Disabled

Route VoIP Calls Via My Telco Line If

VoIP Service is Unavailable

Enables or disables alternative routing of
VoIP calls.

Enabled

42 X6v VoIP Features Technical Reference