Motorola MT2070 Benutzerhandbuch

USB Interface

9 - 3

To set up the device:

Connect the modular connector of the USB interface cable to the host interface port on the cradle or device.

Plug the series A connector in the USB host or hub, or plug the Plus Power connector in an available port of 
the IBM SurePOS terminal.

Select the USB device type by scanning the appropriate bar code from 

On first installation when using Windows, the software prompts to select or install the Human Interface Device 
driver. To install this driver, provided by Windows, click Next through all the choices and click Finished on the 
last choice. The device powers up during this installation.

To modify any other parameter options, scan the appropriate bar codes in this chapter.

If problems occur with the system, see 

 lists the defaults for USB host parameters. To change any option, scan the appropriate bar code(s) 

provided in the Parameter Descriptions section beginning on page 

Interface cables vary depending on configuration. The connectors illustrated in 

 are examples 

only. The connectors may be different than those illustrated, but the steps to connect the device are the 
same.

See 

 for all user preferences, hosts, symbologies, and 

miscellaneous default parameters.

USB Device Type

HID Keyboard Emulation

CDC COM Port Emulation

Disable

Symbol Native API (SNAPI) Status Handshaking

Enable

USB Country Keyboard Types (Country Codes)

North American

USB Keystroke Delay

No Delay

USB CAPS Lock Override

Disable

USB Ignore Unknown Characters

Enable

Emulate Keypad

Disable

Emulate Keypad with Leading Zero

Disable

USB FN1 Substitution

Disable