Motorola MT2070 Manual De Usuario
USB Interface
9 - 3
To set up the device:
1.
Connect the modular connector of the USB interface cable to the host interface port on the cradle or device.
2.
Plug the series A connector in the USB host or hub, or plug the Plus Power connector in an available port of
the IBM SurePOS terminal.
the IBM SurePOS terminal.
3.
Select the USB device type by scanning the appropriate bar code from
4.
On first installation when using Windows, the software prompts to select or install the Human Interface Device
driver. To install this driver, provided by Windows, click Next through all the choices and click Finished on the
last choice. The device powers up during this installation.
driver. To install this driver, provided by Windows, click Next through all the choices and click Finished on the
last choice. The device powers up during this installation.
5.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
If problems occur with the system, see
USB Parameter Defaults
lists the defaults for USB host parameters. To change any option, scan the appropriate bar code(s)
NOTE
Interface cables vary depending on configuration. The connectors illustrated in
are examples
only. The connectors may be different than those illustrated, but the steps to connect the device are the
same.
same.
NOTE
See
for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 9-1
USB Interface Parameter Defaults
Parameter
Default
Page Number
USB Host Parameters
USB Device Type
HID Keyboard Emulation
CDC COM Port Emulation
Disable
Symbol Native API (SNAPI) Status Handshaking
Enable
USB Country Keyboard Types (Country Codes)
North American
USB Keystroke Delay
No Delay
USB CAPS Lock Override
Disable
USB Ignore Unknown Characters
Enable
Emulate Keypad
Disable
Emulate Keypad with Leading Zero
Disable
USB FN1 Substitution
Disable