Wacom 21UX Benutzerhandbuch
Installation
Page 19
DISPLAY CABLING DIAGRAM
– A –
DVI/VGA switch
Rear panel of computer
Video card
DVI or VGA
– C –
DC input
– B –
DVI-I connector
To connect to a DVI-D connector, use the
DVI-D to DVI-I adapter.
To connect to a VGA connector, use the
VGA to DVI-I adapter.
To connect to a DVI-D connector, use the
DVI-D to DVI-I adapter.
To connect to a VGA connector, use the
VGA to DVI-I adapter.
Cintiq, rear view
Power adapter
– D –
To AC outlet
Make sure your video card has a DVI or VGA connector, and that you correctly set the Cintiq
DVI/VGA switch for the video connector you are using.
Use only a power adapter specified for use with Cintiq; use of an improper power adapter may
damage the unit.
Do not connect or disconnect the video or power cables while Cintiq or your computer are
turned on. This can damage the display or computer video card.
Make sure the display refresh rate does not exceed the maximum vertical frequency that Cintiq
can support. See the “Product specifications” on page 68 for details.
DVI/VGA switch for the video connector you are using.
Use only a power adapter specified for use with Cintiq; use of an improper power adapter may
damage the unit.
Do not connect or disconnect the video or power cables while Cintiq or your computer are
turned on. This can damage the display or computer video card.
Make sure the display refresh rate does not exceed the maximum vertical frequency that Cintiq
can support. See the “Product specifications” on page 68 for details.
Caution