Epson 955WH Benutzerhandbuch

Before using the projector, make sure you read the safety instructions in the 
online User’s Guide.

Choose from the following connections. See the sections below or the online 
User’s Guide for details.

HDMI cable 

VGA cable 

Audio cable 

USB cable 

Connect the square end of a USB cable to the projector’s USB-B (square) port. 
Connect the flat end of the cable to any USB port on your computer.

 XP or later: After turning on the projector, follow the on-screen 

instructions to install the Epson

®

 USB Display software (EMP_UDSE.EXE; only 

on first connection). If the software screen does not display automatically, open 
My Computer or Computer, then double-click EPSON_PJ_UD.

OS X 10.5.8 or higher: After turning on the projector, the setup folder for USB 
Display appears in the Finder. Double-click USB Display Installer and follow 
the on-screen instructions to install the Epson USB Display software (only on 
first connection).

Connect one end of a VGA cable to the projector’s Computer1 or Computer2 
port, and the other end to your computer’s 

 monitor port. If you are using 

a laptop, switch it to external display (see “Troubleshooting”). You can also 
connect an audio cable.

Connect one end of an HDMI cable to the projector’s HDMI1 or HDMI2 port 
and the other end to an HDMI port on your computer.

You can connect the projector to your network using an Ethernet cable.

See “Project over a wired network” for instructions.

Connect multiple video devices and use the Source Search button on the 
projector or remote control to switch between them.

Audio cable 

Component video to VGA cable

S-Video cable 

Audio cable 

HDMI cable

RCA video cable

Connect a digital camera, USB flash drive, USB storage device, or Epson DC-06 
document camera to the projector’s USB-A (flat) port.

USB cable

If you connect a digital camera, USB flash drive, or USB storage device, you can 
use the projector’s PC Free feature. You can also connect other Epson document 
cameras to the projector. See the online User’s Guide for details.

Connect tablets, smartphones, and other devices that support the MHL™ 
standard to the HDMI2/MHL port.

MHL cable

Some devices may require an adapter or may not require an MHL cable. Not all 
features or functions may be supported. Check your device’s documentation for 
more information.

You can also connect an external monitor, external speakers, or a microphone 
to your projector to enhance your presentations. See the online User’s Guide for 
details.

 Turn on your computer or video source.

 Plug in the projector. The 

 power light on the projector turns blue.

Open the A/V Mute slide all the way.

Press the 

 power button on the projector or remote control. The 

projector beeps, and the Status light flashes blue and then stays on.

Note: To shut down the projector, press the 

The default language of the menu system is English. To select another 
language, press the Menu button on the projector or remote control. 
Select Extended and press 

. Select Language and press 

. Select 

your language and press 

. Press the Menu button to exit the menu 

system. 

 If you don’t see an image, press the Source Search button on the 
projector or the remote control to select the image source.

Note: If you still see a blank screen or have other display problems, see 
the troubleshooting tips on the back of this sheet.

 To raise the image, press the foot release button and lift the front of the 
projector. Release the button to lock the foot in position.

Turn the zoom ring to enlarge or reduce the image.

 Turn the focus ring to sharpen the image.

 If your image looks like 

 or 

, you may have placed the projector 

off to one side of the screen at an angle. Place the projector directly in 
front of the center of the screen, facing the screen squarely. If you can’t 
move the projector, use the horizontal keystone slider to correct the 
image.

 Your projector automatically adjusts images that look like 

 or 

, 

but if necessary you can press the 

 or 

 button on the projector to 

correct it.

Make sure the batteries are installed as shown (two AA batteries)

Choose which source 
to display

Turn projector 

on and off

Access projector 

menus

Turn off projector 

display

Get solutions to 
common problems

Navigate projector 
menus

For more information on using the remote control, see the online User’s 
Guide.

Follow the steps here to connect the projector over a wireless network. You 
will need the optional wireless LAN module (part number V12H418P12).

To install the wireless LAN module, first remove the screw as shown.

Connect the wireless LAN module to the USB-A (flat) port.

 To configure your projector for wireless projection, do one of the 
following:

 If you’re using the optional Quick Wireless Connection USB 
key (Windows only, part number V12H005M09), press the LAN 
button on the remote control. When you see SSID and IP address 
information on the screen, remove the wireless LAN module 
and connect the key to the projector’s USB-A port. Look for the 
displayed message, remove the key, and connect it to a USB port 
on your computer. Follow the on-screen instructions to install the 
driver, then reconnect the wireless LAN module to the projector’s 
USB-A port. For details, see the online User’s Guide.

 If you’re not using the key, continue with the steps on the next 
page.