Epson 955WH Benutzerhandbuch

 If your network assigns addresses automatically, turn on the DHCP setting. 
If not, turn off the DHCP setting and enter the projector’s IP Address, 
Subnet Mask, and Gateway Address, as needed. Then press Esc.

 To prevent the IP address from appearing on the network standby screen, 
set the IP Address Display setting to Off.

 When you are finished, select Complete and press 

, then press 

again to save your settings.

Press the Menu button to exit the menu system.

See “Install network software” for additional instructions.

Install the EasyMP

®

 Network Projection software on each computer that will 

project over the network. Use the CD labeled Epson Projector Software to 
install the program.

For instructions on installing and using your network software, click the icon 
on your desktop to access the online EasyMP Network Projection Operation 
Guide (requires an Internet connection). If you don’t see the EasyMP Network 
Projection Guide icon, you can install it from the projector CD or go to the 
Epson website, as described on the right.

To monitor and control your projector over the network, download and install 
the EasyMP Monitor software and manual from the Epson support web site. 
You can install a link to the downloads page from the projector CD or go to the 
Epson website, as described on the right

To project from an iOS or Android™ device, download 
and install the Epson iProjection™ app. Visit   

 

epson.com/projectorapp (U.S.) or   

 

epson.ca/projectorapp (Canada) for more information.

If you see a blank screen or the No signal message after turning on your 
computer or video device, check the following:

Make sure the Status light on the projector is blue and not flashing, and 
the A/V Mute slide is open.

Press the Source Search button on the projector or the remote control to 
switch to the correct image source, if necessary.

If you’re using a Windows laptop, press the function key on your 
keyboard that lets you display on an external monitor. It may be labeled 
CRT/LCD or have an icon such as 

. You may have to hold down the 

Fn key while pressing it (such as Fn + F7). Wait a moment for the display 
to appear.

If you’re using a Mac laptop, open System Preferences and select 
Displays. Click the Arrangement tab, and select the Mirror Displays 
checkbox.

For more information about using the projector, click the icons on your desktop 
to access the online manuals (requires an Internet connection). If you don’t 
have icons to the manuals, you can install them from the projector CD or go to 
the Epson website, as described below.

To use the Epson

®

 PrivateLine

®

 Support service, call (800) 637-7661. This service 

is available for the duration of your warranty period. You may also speak with a 
support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada). 

Support hours are 6 

AM

 to 8 

PM

, Pacific Time, Monday through Friday, and 7 

AM

 

to 4 

PM

, Pacific Time, Saturday. Days and hours of support are subject to change 

without notice. Toll or long distance charges may apply.

 Attach the wireless LAN module cover and secure it using the screw you 
removed.

Press the Menu button on the remote control, select the Network 
menu, and press 

.

Choose Network Configuration and press 

.

Select the Wireless LAN menu and press 

.

 Choose  Connection Mode, press 

, select Quick (for a direct 

connection to a computer, tablet, or smartphone) or Advanced (for 
a connection to a router or access point), then press 

 again. When 

you’re finished, press Esc to return to the Wireless LAN menu.

If you chose the Advanced connection mode, select SSID, press 

 and 

enter your network name (SSID) on the screen that appears.

 To select a number or character, use the arrow buttons on the 
remote control to highlight it, then press 

.

 To switch between uppercase and lowercase letters, select CAPS 
and press 

.

 To change the displayed symbols, select SYM1 or SYM2 and 
press 

.

When you’re finished entering the SSID, select Finish and press 

.

 If you chose the Advanced connection mode, select IP Settings and 
press 

.

If your network assigns addresses automatically, turn on DHCP. If not, 
turn off DHCP and enter the projector’s IP Address, Subnet Mask, and 
Gateway Address, as needed.

To enter numbers, use the arrow buttons on the remote control to 
highlight a number, then press the 

 button. When you’re finished 

entering an address, highlight Finish, then press 

. Press Esc.

EPSON, EasyMP, and PowerLite are registered trademarks, Epson iProjection is a trademark, and EPSON Exceed 

Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson 

America, Inc.

OS X and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.

General Notice: Other product names used herein are for identification purposes only and may be trademarks 

of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

© 2014 Epson America, Inc., 11/14

Printed in XXXXXX  

CPD-42065

 To prevent the SSID and IP address from appearing on the network 
standby screen, set the SSID Display and IP Address Display settings 
to Off.

 When you’re finished selecting settings in the Wireless LAN menu, press 
Esc.

 If you are connecting the projector to a secure network, select the 
Security menu and press 

. Then select settings and press Esc when 

you’re finished.

 Select  Complete and press 

, then select Yes and press 

 again to 

save your settings.

See “Install network software” for additional instructions.

Follow the steps here to configure your projector for your wired network 
using the projector’s menu system.

Plug in and turn on the projector.

 Press  the  Menu button on the remote control, select the Network 
menu, and press 

.

Select Network Configuration and press 

.

Select the Basic menu and press 

.

 Select  the  Projector Name setting and enter a name (up to 16 
characters long) to identify your projector over the network.

 Use the displayed keyboard to enter characters. Press the arrow buttons 
on the remote control to highlight the characters and press 

 to select 

them.

Note: See the online User’s Guide for information on adding passwords.

Select the Wired LAN menu and press 

.

Choose IP Settings and press 

.

Visit epson.com/support (U.S.) or epson.ca/support (Canada) for solutions 
to common problems. You can download utilities and documentation, get 
FAQs and troubleshooting advice, or e-mail Epson.

Register today to get product updates and exclusive offers. You can use the CD 
included with your projector or register online at epson.com/webreg.

For a list of optional accessories, see the online User’s Guide.

You can purchase screens or other accessories from an Epson authorized 
reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you 
can purchase online at epsonstore.com (U.S. sales) or epson.ca (Canadian 
sales).