3com 7600 Benutzerhandbuch
9
S
ETTING
N
ETWORK
P
ARAMETERS
This chapter contains detailed descriptions of common management
tasks for setting up your 7600 Card to work with an SNMP manager (for
example, Transcend ATM Manager), TFTP or Telnet (if working through
the CELLplex 7000 unit). An IP address, subnet mask and Default
Gateway must be defined in the bridge to which the SNMP manager is
connected.
tasks for setting up your 7600 Card to work with an SNMP manager (for
example, Transcend ATM Manager), TFTP or Telnet (if working through
the CELLplex 7000 unit). An IP address, subnet mask and Default
Gateway must be defined in the bridge to which the SNMP manager is
connected.
The IP address is used to identify the 7600 Card within the network. The
SNMP and TFTP use this address when connecting to the 7600 Card.
SNMP and TFTP use this address when connecting to the 7600 Card.
The Network Management Station (NMS) IP address is defined in the
7600 Card to enable the unit to send SNMP traps to the NMS.
7600 Card to enable the unit to send SNMP traps to the NMS.
The following management tasks are covered:
Manage IP parameters
Q
Q
Q
Q
Manage SNMP parameters
Q
Q
abtthgde.book Page 1 Tuesday, June 23, 1998 10:29 AM