3com 7600 Benutzerhandbuch
9-2
C
HAPTER
9: S
ETTING
N
ETWORK
P
ARAMETERS
Display Current IP
Configuration
Configuration
Displays the current IP configuration for each of the bridges (refer to
Table 9-2).
Table 9-2).
Example
Enter:
[7] [1] [1]
The following is displayed:
Figure 9-1 IP Configuration Display.
Update IP Address
Enter the bridge number and the new IP Address to update the IP
Address for the specified bridge.
Address for the specified bridge.
Table 9-1 Task Actions
Menu Sequence
Enter
Result
[7] management
[1] ip
[1]display
[1] ip
[1]display
None
Current IP configuration
parameters are displayed for
all bridges
parameters are displayed for
all bridges
Table 9-2 IP Configuration Information
Parameter
Description
Bridge
The number of the bridge (virtual network).
IP addr
The IP address of the bridge.
Subnet Mask
The IP address bit mask of the subnet where the specified bridge
is located. Applying the subnet mask on the IP address
(depending on its class - A, B or C) determines the IP address;
subnet address.
is located. Applying the subnet mask on the IP address
(depending on its class - A, B or C) determines the IP address;
subnet address.
Def. Gateway
The IP address of the default gateway (router) connected to the
specified bridge. The default gateway is only required if routers
are being used in the network. There can be only one router
defined per virtual network (Bridge).
specified bridge. The default gateway is only required if routers
are being used in the network. There can be only one router
defined per virtual network (Bridge).
--------------------------------------------------------------------
Bridge: 0 IP addr. : 100.0.0.1 Subnet Mask: 255.255.255.0
Def. Gateway: 100.0.0.55
Bridge: 1 IP addr. : 100.0.2.2 Subnet Mask: 255.255.255.0
Def. Gateway: 100.0.2.99
--------------------------------------------------------------------
abtthgde.book Page 2 Tuesday, June 23, 1998 10:29 AM