Siemens 2000592-001 Benutzerhandbuch

Continued 

 

Instructions,  
continued 

3.   

Strip the insulation ¼ -inch back from each of the incoming 
copper leads. 

4.   

To make the connections easier we have made the ANCB 
port connector a removable connector. Grasp the top 
portion of the connector and pull it straight out from the 
base connector. Loosen all the top wire retaining screws 
from the removed connector. All connections will be made 
to this connector. 

5.   

Connect Channel A leads to pins 1 through 3 and Channel 
B leads to pins 4 through 6. Tighten down the retaining 
screws. 

Pin 1  

+

Pin 2  

−

Pin 3- Ground
Pin 4-  

+

Pin 5   

−

Pin 6- Ground

 

6.   

Plug Port connector back into its base. 

 

•  15