Siemens 2000592-001 Benutzerhandbuch

This chapter is intended for maintenance personnel. 

This chapter provides definitions for all of the commands you will be 
using for setup purposes or for performing test diagnostics. 

 

These are the commands that are unique to the ANCB. 

config address ip 
ipaddr 

Set the ANCB IP address. 

config address 
ethernet eaddr 

Set the ANCB Ethernet hardware address. 

Display the current ANCB non-volatile 
parameters. 

config netmask 
xxx.xxx.xxx.xxx 

Set the ANCB IP subnetwork. 

Set the default router IP address. 

Display link state table. 

Display and/or change the hdlc setuptime in 
microseconds. 

Display and/or change the hdlc window. 

Download new software via Configuration 
port. 

List next 22 log events. 

List 22 events, starting with number nnn. 

List xxx events, starting with number nnn. 

Continuously list events from the log buffer, 
as they are added (terminate by pressing any 
key). 

Clear all events from log buffer. 

login password 

Log in to device via Configuration port. 

login password 
remoteaddr 

Log in to remove device (ANCB or HUB). 

 

•  35