Siemens 2000592-001 Manual Do Utilizador
Chapter 3
Command Summary
Command Descriptions
Description
This chapter is intended for maintenance personnel.
This chapter provides definitions for all of the commands you will be
using for setup purposes or for performing test diagnostics.
using for setup purposes or for performing test diagnostics.
Unique Commands
These are the commands that are unique to the ANCB.
config address ip
ipaddr
ipaddr
Set the ANCB IP address.
config address
ethernet eaddr
ethernet eaddr
Set the ANCB Ethernet hardware address.
config display
Display the current ANCB non-volatile
parameters.
parameters.
config netmask
xxx.xxx.xxx.xxx
xxx.xxx.xxx.xxx
Set the ANCB IP subnetwork.
config iproute
routeaddr
routeaddr
Set the default router IP address.
display links
Display link state table.
hdlc setuptime
Display and/or change the hdlc setuptime in
microseconds.
microseconds.
hdlc window
Display and/or change the hdlc window.
download
Download new software via Configuration
port.
port.
list
List next 22 log events.
list nnn
List 22 events, starting with number nnn.
list nnn, xxx
List xxx events, starting with number nnn.
list on
Continuously list events from the log buffer,
as they are added (terminate by pressing any
key).
as they are added (terminate by pressing any
key).
list clear
Clear all events from log buffer.
login password
Log in to device via Configuration port.
login password
remoteaddr
remoteaddr
Log in to remove device (ANCB or HUB).
2000592-001
Command Summary
• 35