ViPowER VP-8058 Benutzerhandbuch

4

USBdock Installation Manual

Perform the following steps (in the order given) to set up the USBdock with your
peripheral device for operation:

1. For Windows 98 users: verify that the Windows 98 driver is installed.

2. Plug the USBdock’s 50-pin Centronics connector into the connector on the

device you plan to connect to your computer.

a. External devices that provide a 50-pin Centronics interface connector

support direct connection with the USBdock.

b. Internal devices such as EIDE hard drives or ATA/ATAPI devices can be

mounted in the Mobile Rack drive case. (Refer to the Mobile Rack manual for
instructions on mounting these devices in a Mobile Rack.)