ViPowER VP-8058 사용자 설명서
4
USBdock Installation Manual
LED Indicators
Power Drive Activity
2-1.3 Setting Up the USBdock for Operation
Perform the following steps (in the order given) to set up the USBdock with your
peripheral device for operation:
peripheral device for operation:
1. For Windows 98 users: verify that the Windows 98 driver is installed.
2. Plug the USBdock’s 50-pin Centronics connector into the connector on the
device you plan to connect to your computer.
a. External devices that provide a 50-pin Centronics interface connector
support direct connection with the USBdock.
b. Internal devices such as EIDE hard drives or ATA/ATAPI devices can be
mounted in the Mobile Rack drive case. (Refer to the Mobile Rack manual for
instructions on mounting these devices in a Mobile Rack.)
instructions on mounting these devices in a Mobile Rack.)
IMPORTANT
Make sure the Power Select switch on the USBdock is set
to the MIDDLE power OFF position before proceeding.
to the MIDDLE power OFF position before proceeding.
USB
Connector
Connector
Power Select
Switch
Switch
+5V
External
Power
Connector
External
Power
Connector
USBdock Power Select Switch & Connector Locations
+5V +12V
External
Power Connector
External
Power Connector
50-Pin Centronics
Device Connector
Device Connector
+5V USB
Interface
Interface
Power OFF
External
Power Adapter
Power Adapter
USBdock Power Select Switch Settings