Omron CS1W-RPT01 Benutzerhandbuch

1.

For further details about the CX-Programmer, refer to the WS02-CXPC

@

-

@

2.

Use version 1.54 or higher of CX-Net in version 2.04 or higher of the CX-
Programmer for the CJ-series Controller Link Unit.

3.

For automatic data link creation with 1:N allocations or when changing
data link tables while the data link is active (CS1W-CLK21-V1 and CJ1W-
CLK21-V1), use the CX-Net in CX-Programmer version 3.2 or later.

Select the data link function if alarm or status data (in bits) must be constantly
shared between PLCs or between a PLC and an IBM PC/AT or compatible
computer or if the present value or set value data (in words) must be con-
stantly shared between PLCs or between a PLC and an IBM PC/AT or com-
patible computer.

Select the message service function (SEND/RECV instructions or CMND
instructions) if data (in words) must be sent (or received) from one PLC to

+

Transmissions

Setting data link tables

CX-Net in 
CX-Programmer

IBM PC/AT or 
compatible

Nodes

Controller 
Link Unit

CPU Unit

RS-232C

…

CX-Programmer

WS02-CXPC

@

-E-V

@

CS/CJ-series, 
C200HX/HG/HE, 
CVM1, CV-series, 
and CQM1H-series 
PLCs

IBM PC/AT or compatible

+

Controller Link 
Support Board

Setting data link tables

CX-Net in 
CX-Programmer

…