Omron CS1W-RPT01 User Manual
25
Selection of Communications Functions
Section 1-3
When Operating on Personal Computer as Peripheral Software
When Operating on Personal Computer Connected as a Node
Note
1.
For further details about the CX-Programmer, refer to the WS02-CXPC
@
-
E-V
@
CX-Programmer Operation Manual.
2.
Use version 1.54 or higher of CX-Net in version 2.04 or higher of the CX-
Programmer for the CJ-series Controller Link Unit.
Programmer for the CJ-series Controller Link Unit.
3.
For automatic data link creation with 1:N allocations or when changing
data link tables while the data link is active (CS1W-CLK21-V1 and CJ1W-
CLK21-V1), use the CX-Net in CX-Programmer version 3.2 or later.
data link tables while the data link is active (CS1W-CLK21-V1 and CJ1W-
CLK21-V1), use the CX-Net in CX-Programmer version 3.2 or later.
1-3
Selection of Communications Functions
Select the data link function if alarm or status data (in bits) must be constantly
shared between PLCs or between a PLC and an IBM PC/AT or compatible
computer or if the present value or set value data (in words) must be con-
stantly shared between PLCs or between a PLC and an IBM PC/AT or com-
patible computer.
shared between PLCs or between a PLC and an IBM PC/AT or compatible
computer or if the present value or set value data (in words) must be con-
stantly shared between PLCs or between a PLC and an IBM PC/AT or com-
patible computer.
Select the message service function (SEND/RECV instructions or CMND
instructions) if data (in words) must be sent (or received) from one PLC to
instructions) if data (in words) must be sent (or received) from one PLC to
+
Transmissions
Setting data link tables
CX-Net in
CX-Programmer
CX-Programmer
IBM PC/AT or
compatible
compatible
Nodes
Controller
Link Unit
Link Unit
CPU Unit
RS-232C
…
Software
External
appearance
Model
Applicable PLCs
CX-Programmer
WS02-CXPC
@
-E-V
@
CS/CJ-series,
C200HX/HG/HE,
CVM1, CV-series,
and CQM1H-series
PLCs
C200HX/HG/HE,
CVM1, CV-series,
and CQM1H-series
PLCs
IBM PC/AT or compatible
+
Controller Link
Support Board
Support Board
Setting data link tables
CX-Net in
CX-Programmer
CX-Programmer
…