Eicon Networks Adapters Benutzerhandbuch

 

     Installing Your Server Adapter

 

The installation procedure depends on which Server adapter you have:

• If you are installing a DIVA Server BRI-2M, follow the instructions below.
• If you are installing a DIVA Server PRI, follow the instructions on page 12. 
• If you are installing any other Server adapter, follow the instructions in the 

 

.

 

Before you install your Server adapter or remove the cover from your 
computer for any reason, disconnect the ISDN cable from the ISDN 
network. 

 

The DIVA Server BRI-2M is a Plug and Play adapter. As such, you do not have to 
specify any hardware settings on the adapter.

 

For your safety, turn off the power to your computer and all peripheral 
devices.

 

Drain static electricity from your body by touching the metal chassis (the 
unpainted metal at the back of your computer). 

 

Remove the power cord from your computer.

 

Remove the cover of the computer as described in your computer’s manual.

 

Locate a slot in your computer that has the same bus type as your adapter 
(ISA or PCI), and firmly insert the adapter into the selected slot. 

To avoid damaging your hardware, insert the adapter only into a slot 
with the same bus type as the adapter (

 

: you can also insert an 

ISA adapter into an EISA slot). Inserting the adapter into any other type 
of slot can damage your adapter, your computer, or both.

 

Firmly secure the adapter with a screw (or clip), to ensure that the adapter 
is properly grounded to the computer’s chassis.

 

Replace the cover of the computer as described in your computer’s manual.

 

 To ensure that your 

operating system can find and communicate with the adapter, you have to update 
the system configuration. To do so, use the EISA Configuration Utility (included 
with your computer) to add the Eicon Technology EISA configuration file to your 
system. The EISA configuration file (

 

) is included on the ISDN 

Software Suite CD-ROM under 

 

.