Enterasys Networks RBTSA-AB Benutzerhandbuch

Under System Configuration, click RADIUS. The RADIUS page appears, 
where you can set the primary and secondary RADIUS Server settings.

This page allows for configuration of a Remote Access Dial-in User Service 
(RADIUS) server for authentication purposes in 802.1x networks. You can 
change the settings by entering values in the fields as described in 
Table 12. When you are finished, select Apply.

Table 12   RADIUS Authentication Server Settings

802.1x Authenticator 
State

Enable or disable RADIUS authentication by selecting Enable 
or Disable.

Primary RADIUS 
Server

Enter the IP address of the primary RADIUS Authentication 
Server. Make sure this address matches the address set in the 
RADIUS Authentication software.

Primary RADIUS Port

Enter the port number of the primary RADIUS Authentication 
Server. Make sure this number matches the number set in the 
RADIUS Authentication software. The default port is 1812.

Primary RADIUS 
Secret

Enter the password of the primary RADIUS Authentication 
Server. Make sure this password matches the password set in 
the RADIUS Authentication software.

Secondary RADIUS 
Server

Enter the IP address of the secondary RADIUS Authentication 
Server. Make sure this address matches the address set in the 
RADIUS Authentication software.

Secondary RADIUS 
Port

Enter the port number of the secondary RADIUS 
Authentication Server. Make sure this number matches the 
number set in the RADIUS Authentication software. The 
default port is 1812.

Secondary RADIUS 
Secret

Enter the password of the secondary RADIUS Authentication 
Server. Make sure this password matches the password set in 
the RADIUS Authentication software.