Martin Fireplaces 2518 Benutzerhandbuch

22

This section describes the features for saving and deleting the contents of the control-
ler’s memory. There is also an Upload/Download Utility available from the Martin
web site. This is a free Windows utility for managing lighting programs created with
the 2518 DMX Controller. 

To use the Upload/Download Utility, a straight-through RS-232 cable must be con-
nected between the computer’s serial port and the controller’s RS-232 I/O port. Dis-
connect both devices from AC power before connecting the RS-232 cable. Please
refer to the online documentation for additional details. 

Locking a program in memory turns the 2518 DMX Controller into an easy-to-use
playback controller with manual override. Note, however, that setting tandem mode
unlocks the memory and allows the editing and/or deletion of the programming. 

Turn off the controller. In tandem mode, turn off

the top controller. 

Press and hold the fourth and sixth channel
buttons while turning on the controller. Hold
until “LO” is displayed. 

Repeat steps 1 and 2 to unlock the memory.
“OF” is displayed when the memory is
unlocked. 

These procedures allow you to erase all programming. 

Disconnect the controller from AC power.

Press and hold [Store] and the up arrow button. Apply power.

Disconnect the controller from AC power.

Press and hold [Midi] and the down arrow button. Apply power. 

1-6

(37-42)

7-12

(43-48)

13-18

(49-54)

19-24

(55-60)

25-30

(61-66)

31-36

(67-72)