Moxa Technologies 5400 Series Benutzerhandbuch

 

 

Disabled Mode 

When Operation mode is set to Disabled, that particular port will be disabled. Check the “Apply 
the above settings to all serial ports” to apply this setting to the other port. 

 

The NPort has an IP address based filtering method to control access to the NPort. 

Accessible IP Settings allows you to add or remove “Legal” remote host IP addresses to prevent 
unauthorized access. Access to the NPort is controlled by IP address. That is, if a host’s IP address 
is in the accessible IP table, then the host will be allowed access to the NPort. You can allow one 
of the following cases by setting the parameter. 

y

  Only one host of specific IP address can access the NPort 

Enter “IP address/255.255.255.255” (e.g., “192.168.1.1/255.255.255.255”). 

y

  Hosts on the specific subnet can access the NPort 

Enter “IP address/255.255.255.0” (e.g., “192.168.1.0/255.255.255.0”). 

y

  Any host can access the NPort 

Disable this function. Refer to the following table for more details about the configuration 
example.