Motorola MPC5200 Benutzerhandbuch
4
KADAK
KwikNet MPC5200 FEC Device Driver
4. Configuring the Device Driver
You must define the
KwikNet
device driver attached to each network interface that your
application supports. If you call
KwikNet
procedure
kn_ifadd()
to dynamically add a
network interface at runtime, you must provide the device driver definition as a parameter
in the call.
in the call.
If you specify a prebuilt network, you must define its device driver by using the
KwikNet
Configuration Manager to edit your
KwikNet
Network Parameter File. The driver
parameters are edited on the
Networks
property page. The layout of the window is shown
below. Follow the directions provided in Chapter 2.5 of the
KwikNet
TCP/IP Stack User's
Guide.
The numeric device driver parameters used to configure the operating characteristics of
the
the
KwikNet
MPC5200 FEC Ethernet Device Driver are defined in Appendix A.