Motorola MPC5200 用户手册

You must define the 

KwikNet

 device driver attached to each network interface that your

application supports.  If you call 

KwikNet

 procedure 

 to dynamically add a

network interface at runtime, you must provide the device driver definition as a parameter
in the call.

If you specify a prebuilt network, you must define its device driver by using the 

KwikNet

Configuration Manager to edit your 

KwikNet

 Network Parameter File.  The driver

parameters are edited on the 

Networks

 property page.  The layout of the window is shown

below.  Follow the directions provided in Chapter 2.5 of the 

KwikNet

 TCP/IP Stack User's

Guide.

The numeric device driver parameters used to configure the operating characteristics of
the 

KwikNet

 MPC5200 FEC Ethernet Device Driver are defined in Appendix A.