Konica Minolta 211 Benutzerhandbuch
10
Performing a Scan to Server (FTP) operation
10-4
IC-206
Scanning begins, a connection to the FTP server is established, and
uploading of the scan data begins.
uploading of the scan data begins.
2
Note
To stop scanning, press the [Clear/Stop] key.
If the transmission could not be completed correctly, a transmission re-
sult report is printed.
sult report is printed.
To cancel a queued transmission of scan data, press the [Function] key,
and then select “CANCEL RESERV.”. For details, refer to the User’s
Guide for fax kit FK-506.
and then select “CANCEL RESERV.”. For details, refer to the User’s
Guide for fax kit FK-506.
!
Detail
Only FTP server address registered as speed dial numbers can be spec-
ified. FTP server addresses can be registered as speed dial number by
using PageScope Web Connection. Refer to “Registering speed dial des-
tinations (FTP servers)” on page 8-14.
ified. FTP server addresses can be registered as speed dial number by
using PageScope Web Connection. Refer to “Registering speed dial des-
tinations (FTP servers)” on page 8-14.
A notification of the FTP server address where the data was uploaded
can be sent to up to 10 specified recipients.
When registering the speed dial destination with PageScope Web Con-
nection, select “E-mail Notification”. Refer to “Registering speed dial
destinations (FTP servers)” on page 8-14.
can be sent to up to 10 specified recipients.
When registering the speed dial destination with PageScope Web Con-
nection, select “E-mail Notification”. Refer to “Registering speed dial
destinations (FTP servers)” on page 8-14.