Konica Minolta 211 Benutzerhandbuch
10
Performing a Scan to Server (FTP) operation
10-6
IC-206
–
Align the document on the scales above and to the left of the orig-
inal glass.
inal glass.
–
For information on documents that can be used and the scanning
area of the image, refer to the User’s Guide included with the ma-
chine.
area of the image, refer to the User’s Guide included with the ma-
chine.
3
Press the [Speed Dial] key, and then use the keypad to type in the 3-
digit speed dial number (number programmed with the address of the
FTP server where the data is to be uploaded).
digit speed dial number (number programmed with the address of the
FTP server where the data is to be uploaded).
–
When the destination address is entered, “OTHER SETTING=,”
appears. To change the transmission settings, such as the subject,
cc address or file format, press the [,] key. The “SCAN OTHER
SETTING” menu appears. For details on changing the transmission
settings, refer to “Changing the transmission settings” on
page 9-10.
appears. To change the transmission settings, such as the subject,
cc address or file format, press the [,] key. The “SCAN OTHER
SETTING” menu appears. For details on changing the transmission
settings, refer to “Changing the transmission settings” on
page 9-10.
–
Specify a speed dial number between 241 and 250.
–
If nothing is registered with the specified speed dial number, an er-
ror message appears. Enter the correct speed dial number.
ror message appears. Enter the correct speed dial number.
–
If the number was incorrectly entered, press the [Back] key, and
then type it in correctly.
then type it in correctly.
4
Press the [OK] key.
The destination appears.